Having a DIRECTV remote that also controls your LG TV makes switching between devices and controlling volume much more convenient. With just one remote, you can power on your TV, change channels, adjust volume, and more.
But before you can start using a single remote, you need to pair them. The process of syncing a DIRECTV remote with an LG TV is called programming.
There are a few different ways that answer your question on how to program DIRECTV remote for LG TV depending on your remote model. We will cover the 15 easiest methods in this guide so you can quickly set up your devices to work in tandem.
Why Program DIRECTV Remote for LG TV?
Programming your DIRECTV remote to control your LG TV provides several benefits:
- Simplifies your home theater by reducing remote control clutter.
- Allows seamless control of both devices from one remote.
- Saves time by switching inputs and controlling power and volume quickly.
- Easy to setup – only takes a few minutes to program.
- Works with all DIRECTV and LG TV models.
- Lets you consolidate devices into one easy-to-use system.
Steps for How to Program DIRECTV Remote for LG TV
Here are the best 15 steps to program your DIRECTV remote to control your LG TV:
1. Check Your DIRECTV Remote Model
The first step is to determine your DIRECTV remote model. Turn over the remote and locate the model number engraved on the back.
The most common DIRECTV remotes are:
- DIRECTV RC6X
- DIRECTV RC7X
- DIRECTV RC6Z
- DIRECTV RC32
- DIRECTV RC24
- DIRECTV RC66RX
Knowing your model will determine the programming method.
2. Turn on Your LG TV
Before programming, make sure your LG TV is powered on. Programming sends signals between the DIRECTV remote and TV, so the TV must be on to establish a connection.
3. Locate the Input Button
Find the Input, TV/Video, or Source button on your DIRECTV remote. This is usually near the top of the remote. You will need to press it in a later step.
4. Find the Code for LG TV
Next, you need to find the programming code for LG televisions. The code allows the remote to sync with LG.
- For RC6X or RC7X remotes, use code 10178
- For RC6Z remotes, use code 11317
- For RC32 or RC24 remotes, use code 10702
- For RC66RX remotes, use code 12517
5. Put DIRECTV Remote into Programming Mode
To program the remote, you first need to switch it into programming mode:
- RC6X/RC7X – Press and hold MUTE and SELECT at the same time until the green light at the top blinks twice.
- RC6Z – Press and hold MUTE and ENTER simultaneously until the red light blinks twice.
- RC32/RC24 – Press and hold MUTE and SELECT until the red light stays on.
- RC66RX – Press and hold MUTE and ENTER together until the red light blinks twice.
6. Enter the LG TV Code
With the remote in programming mode, enter your LG code from Step 4:
- For RC6X/RC7X remotes, use the number buttons to enter 10178.
- For RC6Z remotes, input 11317.
- For RC32/RC24 remotes, enter 10702.
- For RC66RX remotes, input 12517.
Finish by pressing the # button.
Read More: Does LG TV Have Bluetooth? Get the Definitive Answer About This Handy Feature in 2023
7. Try Controlling the LG TV
Now point your DIRECTV remote at the LG TV and press POWER. The TV should turn off.
Press VOLUME UP/DOWN. If volume responds, programming was successful.
8. Program Input Button
For full control, you also need to sync the Input button:
- Press and hold SELECT until the red light stays on.
- Press Input on the remote.
- Press SELECT again to save.
The Input button will now switch LG TV inputs.
9. Alternative Programming Methods
If the above steps failed to sync your remote, don’t worry—there are alternative programming options:
Method 1: Auto Code Search
- Put remote into programming mode using the steps in section 5.
- Press and hold the Input button until the light blinks twice.
- Press 9-9-1. The remote will now search codes to find the one matching your LG TV.
- Once the code is found and saved, test it out on your TV.
Method 2: Manual Code Entry
-
Put remote into programming mode using the steps in section 5.
-
Press and hold Input until the light blinks twice.
-
Enter one of the below LG codes:
- 10178, 10712, 10030, 10702, 11317, 10812, 10060, 11903, 11278, 10070
-
Press Input after trying each code to test and save.
Method 3: Remote Code Finder Tool
DIRECTV has an online tool that finds remote codes for your specific TV model.
- Visit http://directv.com/remotecodefinder
- Enter your LG TV model number
- The results will display the matching remote code
- Follow steps 5-7 to program using this code
10. Program Volume and Mute Buttons
After programming the power and input, you also need to sync volume and mute:
- Put remote into programming mode using the steps in section 5.
- Press and hold MUTE until the light blinks twice.
- Press Volume Up on the remote.
- Press MUTE again.
- Press Volume Down on the remote.
- Press MUTE one final time to save settings.
Volume and mute should now operate the LG TV.
11. Program Channel Buttons
Finally, sync the channel buttons:
- Put remote into programming mode using the steps in section 5.
- Press and hold SELECT until light blinks twice.
- Press Channel Up on the remote.
- Press SELECT again.
- Press Channel Down on the remote.
- Press SELECT to save.
The channel buttons will now change your LG TV channels.
12. Try Controlling LG TV
Your DIRECTV remote is now fully programmed to operate your LG television!
Aim the remote at your TV and test out power, volume, channels, and input. All functions should work with the LG.
If any buttons failed to program correctly, repeat the process to troubleshoot or try one of the alternate programming methods.
13. Program DIRECTV Receiver
Don’t forget to also program your DIRECTV remote to control the DIRECTV receiver.
Follow the same process using your receiver’s programming code to be able to power on/off and navigate menus.
14. Label Input Button
To avoid confusion, you can label the Input button on your DIRECTV remote with the name of your LG TV model. This makes it clear which device Input will switch to.
Simply take a small piece of tape and write your TV model like “LG OLED”. Adhere the tape right below the Input button.
15. Reprogram if Needed
If you get a new LG TV or DIRECTV remote in the future, don’t worry—you can always reprogram using these same methods.
Programming takes just a few minutes, so you can sync your remote to additional TVs anytime.
Frequently Asked Questions
Here are some common questions about programming a DIRECTV remote for an LG TV:
How do I get the codes for my LG TV model?
Use the following codes for recent LG TVs:
- 10178, 10712, 10030, 10702, 11317, 10812, 10060, 11903, 11278, 10070
You can also find codes by model number on DIRECTV’s remote code finder page.
What if the codes don’t work for my LG TV?
Try all of the codes since they are not universal. Also try the automatic code search method which scans for your TV’s code.
Do I need to re-program if I get a new DIRECTV remote?
Yes, you will have to re-program a new DIRECTV remote, even if it is the same model. The programming does not carry over.
How can I reset my remote if programmed incorrectly?
Press and hold MUTE and SELECT for 20 seconds until the light blinks to reset the remote. Then start programming again.
Why won’t my volume or input buttons program?
Be sure to program the volume and input functions separately after initial setup. Select each button and press to sync.
Troubleshooting Tips
If you are having issues programming a DIRECTV remote to an LG TV, try these troubleshooting tips:
- Check you have the correct remote code for your LG TV model
- Try all code options since LG uses multiple codes
- Point remote directly at TV when programming
- Replace remote batteries with new ones
- Press buttons firmly when programming
- Reset remote and reprogram from scratch
- Try the automatic code scanning method
- Contact DIRECTV customer support for help
- Ensure TV is on and connected when programming
- Give commands a few seconds to register after programming
With some perseverance, you should be able to get your DIRECTV remote to work with your LG television using one of these techniques.
Conclusion
Programming a DIRECTV remote to work with an LG TV provides a more seamless home theater experience. With the ability to control power, volume, channels, and inputs from one remote, you can avoid juggling multiple controllers.
The process only takes a few minutes. Just identify your remote model, look up the LG code, put the remote in programming mode, enter the code, and test the main functions. There are also alternative programming options if needed.
After following one of these 15 easy methods, your DIRECTV remote will be ready to operate your LG television. So sit back, relax, and enjoy simplified control of your home entertainment system.
